• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

All About OS

All the News Review and Guides related to the Living or Dead OS around us

  • Apple
  • Jailbreak
  • Tweaks
  • Cydia
  • Android
  • Root
  • Windows
  • Apps & Games
  • How to
  • Internet
  • News
You are here: Home / How to / How to Use QFlash Tool
Download-Qualcomm-HS-USB-QDLoader-9008-Drivers

How to Use QFlash Tool

December 11, 2019 By Syeda Samia Leave a Comment

QFlash Tool is a software application that helps you flash stock firmware on the devices running on Qualcomm Chipset using the window computer. Let’s come and check how to use QFlash Tool. There are some easy steps to use QFlash Tool stock firmware.

Requirements:

  • Your mobile battery should be charged at least 50 to 60 percent.
  • You have a mobile device and Correct Stock Firmware to the below mention step.
  • Carefully follow the instructions.
  • Take a proper backup of your mobile data.
  • It is compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10.

Use the QFlash Tool:

Step 1:

Download and install Qualcomm USB Driver on your PC.

Note: If you already installed the Qualcomm USB Driver then you don’t need to install it again just skip the step.

Step 2:

After this download and extract the QFlash Tool. After extracting a list of files shown on your screen.

Step 3:

Then Open QFlashTool.exe to launch the tool.

Step 4:
Once it launched a pop-up appears on your screen.
Step 5:
Now Click on the Load Content button and locate the stock firmware which you want to flash on your device

Note: Assume that you’ve already downloaded the stock firmware of your device.

Step 6:

Now in EDL Mode just Boot your device. How to Boot? Simply Press and Hold the boot key of your device switch off your device and connect it to PC via USB cable.

Note: Boot key refers to device-to-device. You can google the boot key of your device.

Step 7:

Once it is connected to PC, you’ll be able to see Qualcomm HS-USB QDloader 9008 Message on the Tool.

Step 8:
After seeing the message click on the Download button to start the flashing process.
Step 9:

The process takes a few minutes to complete depending upon the size of the firmware.

Step 10:

Once it completes you’ll be able to see Done message in the Status area of the Tool.

Congratulations! All done!

Flashing is completed now remove your device from the computer and restart it.

Conclusion:

These are the instructions that you must follow carefully to use this QFlash Tool. But if you still find any difficulty then let us know in the comment section below!

Also Read: Download MTK Flash Tool All Versions

Filed Under: How to Tagged With: computer, EDL Mode, pc, QFlash, Qualcomm USB Driver, Stock Firmware, USB cable

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Recent Posts

  • You Need to Know Android 11 Features
  • Android Features: 11 Best Android Features
  • Ways to clear cache from windows android mac and iPhone in 2020
  • How to Transcribe Request to Siri in iOS 14
  • Set Up Conversation Mode In Translate App – iOS 14

Recent Comments

  • Rj sagor on How To Use BirdA Flash Tool
  • Rj sagor on How To Use BirdA Flash Tool
  • oleksa on Stock Firmware Installation On Note 10 & Note 10+
  • Fiona on A Complete Review On Apple iPhone XR vs iPhone X
  • Arham Ibrahim on Reasons To Buy OnePlus 7T Pro: All you need to know

Copyright © 2021 · AllAboutOS - About Us - Contact Us - Jobs - Advertisments - Privacy Policy