The stable Android 10 update topped with One UI 2 is now available for the Samsung Galaxy S9 and S9 Plus handsets. We have added the download links of the stable firmware for the devices. As also the installation guides to help you install the updates. The stable Android 10 update is available as builds DTAA in Europe and DTA5 in the United States. Along with full software version being G960FXXU7DTAA and G965FXXU7DTAA for S9 and S9 Plus respectively in Europe, and G960USQU7DTA5 and G965USQU7DTA5 for S9 and S9 Plus respectively in the United States. We will tell you about Force Install Android 10 on Samsung Galaxy S9 and S9 Plus
Before you download the Android 10 update, make sure you carefully read the warning and compatibility sections given below.
How to Force Install Android 10 Update on Galaxy S9, S9 Plus
Do not try anything given on this page if you do not completely know what you are doing. In case any damage occurs, we won’t be held responsible. make sure that you match the model no. of your device with the model no. of the download file.
This guide is compatible only for the Galaxy S9 and Galaxy S9 Plus handsets. Do not try this on any other device as you might end up damaging your device and can permanently brick it.
Make sure that you back up all the important data (including photos and videos, contacts, music, videos, files, etc.) on your Galaxy S9.
Below are the download links of the stable Android 10 update for the Galaxy S9 and S9+ devices, both for the US and Europe.
Galaxy S9 Android 10 Firmware
- For Europe/Asia/Australia, unlocked model SM-G960F:
- Version DTAA (For Germany, but works fine for all the regions in Europe, Asia, Australia, and many more)
- For carrier locked United States model SM-G960U:
- Version DTA5 (Xfinity Mobile firmware, should work for all the carriers. That includes T-Mobile, Verizon, Sprint, etc. but you may lose carrier-specific features if any))
- For unlocked United States models SM-G960U1:
- Not released yet
Galaxy S9 Android 10 Firmware
- For Europe/Asia/Australia, unlocked model SM-G965F:
- Version DTAA (For Germany, but works fine for all the regions in Europe, Asia, Australia, and more)
- For carrier locked US model SM-G965U:
- Version DTA5 (Xfinity Mobile firmware, should work for all the carriers including T-Mobile, Verizon, Sprint, etc. but you may lose carrier-specific features if any))
- For unlocked US models SM-G965U1:
- Not released yet
- Make sure that you have enabled ‘OEM unlock‘ under the Developer options in the Settings application.
- Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.)
- Also, download Odin PC software (latest version, 3.13.3).
- Extract the firmware file now. You can also use free software like 7-zip for this. Install 7-zip, then right-click on firmware file and under 7-zip, select ‘Extract here’. You should get files in .tar.md5 format now. (You may a bunch of files. And you will find text like AP, BL, CP or CSC, etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device.
- Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).
- Disconnect your Galaxy device from PC if it is connected.
- Boot your device into download mode:
- Power off your device. Wait for 6-7 seconds after the screen goes off.
- Connect the device to PC using the USB cable while pressing and holding Volume down + Bixby buttons together until you see the Warning screen (image).
- Press Volume Up to continue to download mode.
- Double click on Odin .exe file (from step 5) to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.
- Connect your device now using the USB cable. Odin should recognize your device. It is a must. When it recognizes, you will then see Added!! message appearing in the Log box in the bottom left, and the first box under ID: COM will also show a no. and turn its background blue.
- You cannot proceed until you get the Added!! the message, which confirms that Odin has recognized your device.
- If you do not get Added!! the message, you need to install/re-install drivers again and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
- You can try different USB ports on your PC too.
- Load the firmware files into Odin. Click the AP button on Odin and then select the .tar.md5 file from above. See the screenshot below to find how the Odin window will look like after you have loaded the files.
- Click on the BL tab, and select the file beginning with BL text.
- Then click on the AP tab, and select the file beginning with AP text.
- Click on the CP tab, and select the file beginning with CP text.
- [Different!] Click on the CSC tab, and select the file beginning with HOME_CSC text. If the HOME_CSC file is not available, then select the file beginning with CSC text.
When you load files, Odin checks the md5 sum of the firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it is actually normal. Binary size will also show up in Odin
- Click on the Options tab, and make sure the Re-partition checkbox is NOT selected. Do not use the PIT tab, ever.
Go back to the Log tab now, as it will show the progress of the firmware installation when you hit the start button in the next step.
- Verify that everything is okay as mentioned above. When satisfied. Click the Start button on Odin now to start flashing the firmware on your device.
Wait till the installation is finished, after which your device will reboot automatically. You will get the PASS message as shown below upon successful installation from Odin.
Some errors you may run into, and with the respective solution.
- If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again. Open Odin, and then select the file and flash it again as said above.
- If you get FAIL in the top left box. Then also you need to flash the file again as stated just above
Alright, That was all Folks! I hope you guys like this Force Install Android 10 article and find it helpful. Give us your feedback on it. However, if you guys have further queries related to this article. Then let us know in the comments section below. We will get back to you shortly!
Have a Great Day!